PSD estimation in Cognitive Radio systems: a performance analysis

Peer Reviewe

Reliable and Repeatable Power Measurements in DVB-T Systems

Non

On Employing a Savitzky-Golay Filtering Stage to Improve Performance of Spectrum Sensing in CR Applications Concerning VDSA Approach

Abstract In this paper, a filtering stage based on employing a Savitzky-Golay (SG) filter is proposed to be used in the spectrum sensing phase of a Cognitive Radio (CR) communication paradigm for Vehicular Dynamic Spectrum Access (VDSA). It is used to smooth the acquired spectra, which constitute the input for a spectrum sensing algorithm. The sensing phase is necessary, since VDSA is based on an opportunistic approach to the spectral resource, and the opportunities are represented by the user-free spectrum zones, to be detected through the sensing phase. Each filter typology presents peculiarities in terms of its computational cost, de-noising ability and signal shape reconstruction. The SG filtering properties are compared with those of the linear Moving Average (MA) filter, widely used in the CR framework. Important improvements are proposed

Development and Assessment of a Movement Disorder Simulator Based on Inertial Data

The detection analysis of neurodegenerative diseases by means of low-cost sensors and suitable classification algorithms is a key part of the widely spreading telemedicine techniques. The choice of suitable sensors and the tuning of analysis algorithms require a large amount of data, which could be derived from a large experimental measurement campaign involving voluntary patients. This process requires a prior approval phase for the processing and the use of sensitive data in order to respect patient privacy and ethical aspects. To obtain clearance from an ethics committee, it is necessary to submit a protocol describing tests and wait for approval, which can take place after a typical period of six months. An alternative consists of structuring, implementing, validating, and adopting a software simulator at most for the initial stage of the research. To this end, the paper proposes the development, validation, and usage of a software simulator able to generate movement disorders-related data, for both healthy and pathological conditions, based on raw inertial measurement data, and give tri-axial acceleration and angular velocity as output. To present a possible operating scenario of the developed software, this work focuses on a specific case study, i.e., the Parkinson’s disease-related tremor, one of the main disorders of the homonym pathology. The full framework is reported, from raw data availability to pathological data generation, along with a common machine learning method implementation to evaluate data suitability to be distinguished and classified. Due to the development of a flexible and easy-to-use simulator, the paper also analyses and discusses the data quality, described with typical measurement features, as a metric to allow accurate classification under a low-performance sensing device. The simulator’s validation results show a correlation coefficient greater than 0.94 for angular velocity and 0.93 regarding acceleration data. Classification performance on Parkinson’s disease tremor was greater than 98% in the best test conditions

On the use of complex excitation sequences for eddy current testing

Peer Reviewe

An Eddy-Current Testing Method for Measuring the Thickness of Metallic Plates

Thickness measurements of metallic plates are mandatory in many industrial scenarios. Methods based on eddy-current testing (ECT) are ideal for fast and accurate online contactless thickness measurements, making them very attractive in the Industry 4.0 scenario. This contribution is focused on a specific and robust ECT technique proposed in the past by the scientific community. The main limitation is its applicability to thin materials only, where the thickness of the material is much smaller than the overall size of the ECT probe. Extending the range of applicability to thicker materials introduces a progressive and severe degradation of the measurement accuracy. In this article, we analyze the theoretical foundation of this method with an entirely original approach based on the celebrated Buckingham π theorem. In doing this, we draw the complete theoretical picture of the method, providing a simple, clear, and rigorous view of its performance and intrinsic limitations. Moreover, we propose two solutions, one analytical and the other iterative, to accurately estimate the thickness of the materials from thin to thick values. Finally, a numerical analysis combined with an experimental campaign confirms the effectiveness of the proposed solutions, making the method suitable for industrial and other applications

An experimental comparison of complex excitation sequences for eddy current testing

Eddy Current Testing (ECT) is a Non Destructive technique widely used in many industrial application fields in which it is very important to detect the presence of thin defects (generally called cracks) in conductive materials. Features of this technique are the cost-effective implementation and the kind of retrieved measured data that make possible to estimate the geometrical characteristics of a crack as position, length, width and depth. The analysis of these characteristics allows the user to accept or discard realized components then improving the production chain. To accomplish for this task some aspects have to be taken into account during the measurement process. They mainly concern the realization of suitable measurement setup and post processing stages. As far as the measurement setup is concerned, crucial aspects are the choice of measurement and excitation devices. The choice of optimized excitation devices and strategies is of interest for research on Non Destructive ECT (ND-ECT): together with common aspects as the amplitude and the frequency of the exciting signal, the attention has been paid to issues as the type of signal to be adopted. In particular it has been found as the use of complex excitation signals, meant as signals different from the sinusoidal ones and with wide frequency content, might raise eddy current responses trying to support the measurement, detection and characterization stages when "difficult cases" are explored (i.e. very small and/or annealed cracks). In this paper the authors propose an experimental comparison of different excitation signals designed to improve the quality of experimental data when difficult cases are experienced and, consequently, to obtain a more reliable extraction of defects geometrical features

Magnetic resonance imaging 3t and total fibrotic volume in autosomal dominant polycystic kidney disease

INTRODUCTION: Autosomal dominant polycystic kidney disease (ADPKD) is the most common renal hereditary disorder. Several authors have attempted to identify a kidney damage marker for predicting the prognosis and the effectiveness of therapy in ADPKD. The aim of this study was to identify and quantify in ADPKD, through a novel MR protocol with 3 Tesla (MRI 3Tesla), the presence of parenchymal fibrotic tissue at early stage of disease, able to correlate the glomerular filtrate and to predict the loss of the function renal. MATERIAL AND METHODS: 15 ADPKD patients undergone to renal MRI 3Tesla at T0 and revaluated after follow up (T1) of 5 years. We have evaluated renal function, plasma aldosterone concentration (PAC), insulin resistance and surrogate markers of atherosclerosis (carotid intima media thickness (IMT), ankle/brachial index (ABI) and left ventricular mass index (LVMI). RESULTS: Our study showed a significant negative correlation between total kidney volume and estimated glomerular filtration rate (eGFR) during observational observation (p<0.02). Moreover, we showed a negative correlation between eGFR with Total Fibrotic Volume (TFV) (p<0.04) and Total Perfusion Volume/Total kidney Volume(<0.02). Moreover TFV was correlated positively with PAC (p<0.05), insulin values (p<0.05), ABI (p <0.05) and LVMI(p<0.01). CONCLUSIONS: The MRI 3Tesla, despite the high costs, could be considered an useful and non-invasive method in the evaluation of fibrotic tissue and progression of the disease in ADPKD patients. Further clinical trials on larger group are due to confirm the results of this pilot study, suggesting that MRI 3Tesla can be useful to evaluate the effectiveness of new therapeutic strategies. This article is protected by copyright. All rights reserved